Project Title: Development of a novel cooling strategy for dry grinding and experimental investigations on its performance

Funding Agency: SERB-CRG

Role: Principal Investigator (PI)

Status: Ongoing

Society of Manufacturing Engineers (SME)

American Society of Mechanical Engineers (ASME)

1. Challenges and Recent Advances in Grinding, The Institution of Engineers (India) Palghat Local Centre on 18-02-2024

2. Micro Grinding: Insights and Challenges, Department of Mechanical Engineering, IIT Delhi on 13-10-2021 

3. Understanding the Analysis of Variance (Short Term Training Program on 'Design of Experiments in Engineering' at B V Raju Institute of Technology, Narsapur on 05-01-2021) (presentation link)

4. Recent Advances in Grinding (Faculty Development Program on 'Teaching and Learning of Advances in Manufacturing Technologies' at NIT Warangal on 03-12-2020) 

5. Recent Advances in Grinding (Faculty Development Program on 'Recent Trends in Advanced Machining and Additive Manufacturing' at Rajasthan Technical University and SKIT Jaipur on 08-09-2020) 

6. Kinematic Simulation of Micro Grinding Process (at 68th CIRP general assembly, Tokyo, Japan on 23-08-2018) (https://www.cirp.net/) (presentation link)

Patents

1. Method and system for cooling workpiece during grinding/cutting process (Filed, Indian Patent, Application Number: 202441035424)

Book Chapters

1. Kamal Kishore, Manoj Kumar Sinha, Dinesh Setti, 'Grinding and Recent Trends', Additive and Subtractive Manufacturing Processes: Principles and Applications, 2022, Edited by Varun Sharma, Pulak Mohan Pandey, CRC Press. (ISBN 9781003327394) (Link)

2. Dinesh Setti, 'Electric Discharge Grinding (EDG)', Electric Discharge Hybrid-Machining Processes, 2022, Edited by Basil Kuriachen, Jose Mathew, Uday Shanker Dixit, CRC Press. (ISBN 9781003202301) (Link)

Journals 

2024

1. Vaisakh S, Dinesh Setti, Grindability of additively manufactured Inconel 718, Journal of Manufacturing Processes, 2024; 112: 238-247. (IF: 6.2) (Link)

2020

1. Dinesh Setti, Peter A. Arrabiyeh, B. Kirsch, M. Heintz, J.C. Aurich, Analytical and Experimental Investigations on Mechanism of Surface generation in micro grinding, International Journal of Machine Tools and Manufacture, 2020; 149: 103489. (IF: 14.0) (Link) 

​2019

1. Peter A. Arrabiyeh, Dinesh Setti, S. Basten, B. Kirsch, J.C. Aurich, Micro grinding 16MnCr5 hardened steel using micro pencil grinding tools with diameters ∼50 μm, CIRP Journal of Manufacturing Science and Technology, 2019; 27: 1- 10. (IF: 4.8) (Link)

2. J.C. Aurich, B. Kirsch, Dinesh Setti, D. Axinte, A. Beaucamp, P. Butler-Smith, H. Yamaguchi: Abrasive Processes for Micro Parts and Structures, CIRP-Annals Manufacturing Technology, 2019; 68(2): 653-676. (IF: 4.1) (Link)

3. Dinesh Setti, B. Kirsch, J.C. Aurich: Characterization of micro grinding tools using optical profilometry, Optics and Lasers in Engineering, 2019; 121: 150-155. (IF: 4.6) (Link)

4. Dinesh Setti, B. Kirsch, J.C. Aurich: Experimental investigations and kinematic simulation of single grit scratched surfaces considering pile-up behaviour: grinding perspective, The International Journal of Advanced Manufacturing Technology, 2019; 103(1): 471-485. (IF: 3.4) (Link)

2018

1. Dinesh Setti, Sudarsan Ghosh, P Venkateswara Rao: Influence of nanofluid application on wheel wear, coefficient of friction and redeposition phenomenon in surface grinding of Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2018; 232(1): 128-140. (IF: 2.6) (In the list of Editor´s choice articles) (Link)

2017

1. Dinesh Setti, Sudarsan Ghosh, P Venkateswara Rao: A method for prediction of active grits count in surface grinding.Wear, 2017; 382-383: 71-77. (IF: 5.0) (Link)

2. B. C. Behera, Chetan, Dinesh Setti, S. Ghosh, P. V. Rao: Spreadability studies of metalworking fluids on tool surface and its impact on minimum amount cooling and lubrication turning. Journal of Materials Processing Technology, 2017; 224:1-16. (IF: 6.3) (Link)

2016

1. Manoj Kumar Sinha, Dinesh Setti, Sudarsan Ghosh, P Venkateswara Rao: An investigation on surface burn during grinding of Inconel 718. Journal of Manufacturing Processes, 2016; 21:124-133. (IF: 6.2) (Link)  

2. Manoj Kumar Sinha, Dinesh Setti, Sudarsan Ghosh, P Venkateswara Rao: An alternate method for optimization of minimum quantity lubrication parameters in surface grinding. International Journal of Machining and Machinability of Materials, 2016; 18(5/6):586-605. (Link) 

2015

1. Dinesh Setti, Manoj Kumar Sinha, Sudarsan Ghosh, P Venkateswara Rao: An investigation into the application of Al₂O₃ nanofluid-based minimum quantity lubrication technique for grinding of Ti-6Al-4V. International Journal of Precision Technology, 2015; 4(3/4):268 - 279. (Link) 

2. Dinesh Setti, Sudarsan Ghosh, P Venkateswara Rao: A modified model for estimating the contact length in surface grinding. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2015; 229(9): 1669-1677. (IF: 2.6) (Link) 

3. Dinesh Setti, Manoj Kumar Sinha, Sudarsan Ghosh, P Venkateswara Rao: Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of nanofluids. International Journal of Machine Tools and Manufacture, 2015; 88:237-248. (IF: 14) (Top-Cited Journal Research Article for more than two years) (Link) 

2014

1. Dinesh Setti, Nitesh Kumar Yadav, Sudarsan Ghosh: Grindability improvement of Ti-6Al-4V using cryogenic cooling. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2014; 228(9):1131-1137. (IF: 2.6) (Link) 

Conferences

​2018

1. Dinesh Setti, B. Kirsch, Peter A. Arrabiyeh, JC Aurich: Visualization of geometrical deviations in micro grinding by kinematic simulations. Proceedings of the 2018 Manufacturing Science and Engineering Conference (MSEC2018), Paper No. MSEC2018-6576, pp. V004T03A038; 7 pages. (Presented at Texas A&M University, College Station, TX, USA on 21-06-2018) (Link) 

2017

1. Dinesh Setti, B. Kirsch, JC Aurich: A Method to Predict and Visualize the Wheel and Work Surface Topography in Surface Grinding. Applied Mechanics and Materials 869 - Proceedings of the 1st Conference on Physical Modeling for Virtual Manufacturing Systems and Processes (2017): pp. 62-68. (Presented at Speyer, Germany on 08-06-2017) (Link) 

2. Dinesh Setti, B. Kirsch, JC Aurich: 2017, An Analytical Method for Prediction of Material Deformation Behavior in Grinding Using Single Grit Analogy. Procedia CIRP 58 - Proceedings of the 16th CIRP Conference on Modeling of Machining Operations, pp. 263-268. (Presented at Ecole Nationale Supérieure d'Arts et Métiers, Cluny, France on 17-06-2017) (Link) 

2014

1. Dinesh Setti, S Ghosh, P Venkateswara Rao: An Effective Method to Determine the Optimum Parameters for Minimum Quantity Lubrication (MQL) Grinding. 5th International and 26th All India Manufacturing Technology, Design, and Research Conference (AIMTDR-2014), Department of Mechanical Engineering, IIT Guwahati, Guwahati, India; 12/2014

2013

1. Dinesh Setti, S Ghosh, P Venkateswara Rao: 2013, Review on minimum quantity lubrication (MQL) in grinding and its application with Nanofluids. A National Conference on Manufacturing: Vision for Future (MVF2013), IIT Guwahati, India. (October 12-13/2013) pp.61-65.

2. Dinesh Setti, Jose Mathew: 2013, Modelling of burr formation in Micro End Milling. 8th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8), NIT Calicut, Kerala, India. (December 13-15/2013) pp. 90-95.

2011

1. Dinesh Setti, Jose Mathew: 2011, Modelling of Surface Roughness in Micro End Milling through Response Surface Method. 7th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-7), College of Engineering Pune, India. (December 10-11/2011) pp. 459-462.

2010

1. Dinesh Setti, Mukesh M, Jose Mathew: 2010, Study of Tool Wear and Surface Roughness in Micro End Milling. 3rd International and 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2010), Andhra University, Visakhapatnam, India. (December 13-15/2010) pp.401-404.

2. Mukesh M, Dinesh Setti, Viran V, Manu R, Jose Mathew: 2010, Experimental Studies on Cutting Forces and Surface Roughness in Micro Turning. 3rd International and 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2010), Andhra University, Visakhapatnam, India. (December 13-15/2010) pp.365-370.