Journal paper/Edited Book Chapters:

• 1) Bijit Kalita and KVN Surendra, 2019. Mixed Mode Fracture Analyses Using Finite Element Method of Edge Cracked Heavy Spinning Annulus Pulley, International Journal of Aerospace and Mechanical Engineering, Vol:13, No:5, Pages: 377-382, ISNI:91950263.
• 2) Mohammed Shafeeque K.K., Surendra K.V.N. (2022) Analysis of a Double Edge Cracked Circular Ring Under Diametrical Compression. In: Maiti D.K. et al. (eds) Recent Advances in Computational and Experimental Mechanics, Vol II. Lecture Notes in Mechanical Engg. Springer. https://doi.org/10.1007/978-981-16-6490-8_34
• 3) Mohammed Shafeeque K.K., Surendra K.V.N. (2022) Stress Distribution in Infinitely Long Plate with Circular Hole Loaded by Concentrated Loads. Chapter of Edited Book  In: T. Tadepalli and V. Narayanamurthy (eds) Recent Advances in Applied Mechanics. Springer.     https://doi.org/10.1007/978-981-16-9539-1_7

Conference presentations:

1. 1) KVN Surendra & Aditya Pratap Singh, July 2017. Stress intensity factor of spinning center-cracked Brazilian disk, Indian Conference on Applied Mechanics (INCAM)-2017, MNIT Allahabad.
2. 2) Rohit Kumar & KVN Surendra, July 2018. Finite element stress analysis of simplified 2-D model of automobile wheel, NAFEMS India Regional Conference on Engineering Modelling, Analysis, Simulation and 3D-Printing, Bengaluru.
3. 3) Bijit Kalita and KVN Surendra, Contact stress analysis of a heavy annulus pulley of transmission system, Poster, 4^th Indian Conf. on Applied Mech. (INCAM-2019), IISc Bangalore, 3-5 July 2019.
4. 4) Bijit Kalita and KVN Surendra, Finite element analyses of a centre cracked heavy rotating pulley, 1^st Int. Conf. on Mechanical Power Transmission (ICMPT-2019), IIT Madras, 11-13 July 2019.
5. 5) Mohammed Shafeeque KK and KVN Surendra, Stress Analysis of a Brake Drum under different contact conditions, IndiaTrib international conference, IISc, Bangalore, 1-4 Dec 2019.
6. 6) Mohammed Shafeeque K K and K V N Surendra, Stress Analysis of Diametrally Loaded Circular Ring at Inner/Outer Edge, 65^th Congress of The ISTAM (Indian Society for Theoretical and Applied Mechanics), An international conference, IIT Kharagpur & GITAM Univ, 9-12 Dec 2020.

During Jul 2017 - Jun 2023:

Core courses:

• ME5011: Mathematics For Engineers
• ME3040: Mechanical Vibrations
• ME1130: Engineering Drawing
• ME3070: Design of Machine Elements
• ME3060: Machine Design Practice
• Machine Drawing Practice, Applied Mechanics Lab, ME Labs - I, II, III & Workshop Practice I

Electives:

• ME3522: Introduction to Finite Element Methods
• ME5501: Finite Element Methods
• ME5001: Fracture Mechanics
• ME5616: Impact mechanics of solids
• ME4501: Computer Aided Design

Ph.D. Students:

• Mr. Mohammed Shafeeque K.K. (Jul 2018 - ongoing)
• Ms. Swapnil Singh (Aug 2021 - ongoing)
• Mr. Gokul Krishnan M.U. (Aug 2022 - ongoing)

M.S. Student:

• Bijit Kalita (Jan 2018 - Dec 2019)

B.Tech Project (BTP) Students:

• Addanki Sasidhar and Manikanta Sai; only Phase-2 (2019-23)
• M.Swapna and Viswanadhapalli Sushma (2019-23)
• Gugulothu Shiva, Maanas Rokkala (2018-22) and Bhanu Prakash Kompally (2016-22)
• Gopu Krishnan and Harsh Raj (2017-21)
• Shubham, Naga Srihari, Utsav Khaitan and Gaurav Saharan (2016-20)
• Rohit Kumar, Monarch Mech and Prakhar Agrawal (2015-19)

M.Tech (Manufacturing & Materials Engg.) Project (MTP) Students:

• Ashish Tandan (2020-22): co-guiding with Dr. Chakradhar as the main guide
• Deepank Rahi (2019-21): co-guided with Dr. Chakradhar as the main guide